top of page
-Publications-

 

  • Pederson, F., Florendo, R., Khawaja, S. A., Kim, H. J., & Dimond, K. Effects on the compressive strength of cement-stabilized rammed earth blocks with varied content of buffelgrass-based fibers in wet-dry conditions. Frontiers in Built Environment, 10, 1362254.

  • Kurniati, E. O., Pederson, F., & Kim, H. J*. (2023). Application of steel slags, ferronickel slags, and copper mining waste as construction materials: A review. Resources, Conservation and Recycling, 198, 107175.

  • Kim, H.J*., Yamada, Y., Zeng, H., Iwanami, M (2023). A study of chloride pretreatment methods for enhancing strength of mortar by recycling Municipal Solid Waste Incineration (MSWI) bottom ash. Case Studies in Construction Materials, Volume 19, December 2023, e02349

  • Kim, H. J., & Khalid, H. R. (2022). The effects of calcium aluminate cement substitution on physicochemical properties of geopolymer–zeolite composites. Arabian Journal for Science and Engineering, 47(4), 5073-5078.

  • Loh, H. C., Kim, H. J., Ulm, F. J., & Masic, A. (2021). Time-Space-Resolved Chemical Deconvolution of Cementitious Colloidal Systems Using Raman Spectroscopy. Langmuir.

  • Kim, H. J., Tafesse, M., Lee, H. K., & Kim, H. K. (2019). “Incorporation of CFBC ash in sodium silicate-activated slag system: Modification of microstructures and its effect on shrinkage”, Cement and Concrete Research, Vol. 123, 105771.

  • Weger, D., Kim, H., Talke, D., Henke, K., Kränkel, T., & Gehlen, C. (2020, July). Lightweight Concrete 3D Printing by Selective Cement Activation–Investigation of Thermal Conductivity, Strength and Water Distribution. In RILEM International Conference on Concrete and Digital Fabrication (pp. 162-171). Springer, Cham.

  • Kim, H.J. and Lee, H.K. (2017). “Mineral Sequestration of Carbon Dioxide in Circulating Fluidized Bed Combustion Boiler Bottom Ash”, Minerals, Vol. 7, No. 12, pp. 237.

  • Kim, G. M., Khalid, H. R., Kim, H. J. and Lee, H. K. (2017). “Alkali activated slag pastes with surface-modified blast furnace slag”, Cement and Concrete Composites, Vol. 76, pp. 39-47.

  • Jang, J. G., Kim, G. M., Kim, H. J., and Lee, H. K. (2016). “Review on recent advances in CO2 utilization and sequestration technologies in cement-based materials”, Construction and Building Materials, Vol. 127, pp. 762-773.

  • Jang, J. G., Kim, H. J., Kim, H. K., and Lee, H. K. (2016) “Resistance of coal bottom ash mortar against the coupled deterioration of carbonation and chloride penetration”, Materials & Design, Vol. 93, pp. 160-167

  • Jang, J. G., Kim, H. J., Park, S. M., and Lee, H. K. (2015) “The influence of sodium hydrogen carbonate on the hydration of cement”, Construction and Building Materials, Vol. 94, pp. 746-749

-Conferences-

 

  • Pederson, F., Kim, H.J.* (2023) “3D Printing Applications in Civil Engineering: A Brief Review of Biological Self-Healing Methods”. American Concrete Institute conference, San Francisco, CA, Apr. 2-6, 2023

  • Zeng, H., Latypov, M., Kim, H.J.* (2023) “Prediction of compressive strength of cement paste incorporating copper mine tailing using machine learning techniques”. American Ceramic Society (ACers): 13th Advances in Cement-Based Materials., New York, NY, Jun. 14-16, 2023

  • Kurniati., E. O., Zhang, G., Kim, H.J., Kundu, T, (2023) “Comparison of Finite Element and Peri-Ultrasound Based Modeling to Study the Nonlinear Response of Cracked Plates” ASME 2023 50th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE2023), Austin, TX, Jul. 24-27, 2023

  • Kurniati., E. O., Zhang, G., Kim, H.J., Kundu, T, (2023) “Comparison of Finite Element and Peri-Ultrasound Based Modeling to Study the Nonlinear Response of Cracked Plates” ASME 2023 50th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE2023), Austin, TX, Jul. 24-27, 2023

  • Lopez, P.,  Aguilera, C.O., Risso, N., Anani, A., Kim, H.J. (2022)" Increasing Mine Safety using Computer Vision", SME Arizona conference, Tucson, AZ, Dec. 4-5, 2022

  • Lee, Y.W., Kim, H.J., Moon, J.H. (2022), “In-Situ Raman Imaging of Early Ye’elimite Hydration”, 2022 Fall Korea Concrete Institute Conference, Jeju, South Korea Nov. 2-4, 2022

  • Kim, H.J (Plenary Speaker) (2022) “Sustainable construction materials for the transportation infrastructure”, 5th International Conference on Transportation Infrastructure, Lima, Peru, Aug. 10-12, 2022

  • Kurniati, E.O. and Kim, H.J* (2022) “A review on application of steel slag as sustainable material in pavement”, 5th International Conference on Transportation Infrastructure, Lima, Peru, Aug. 10-12, 2022

  • Kim, H.J. (2022) “Designing Low-CO2 & Sustainable Concrete by Understanding Cement Hydration Mechanisms”, 16th International Symposium on Functionally Graded Materials Hartford, Connecticut, USA, Aug. 7-10, 2022

  • Lee, Y.W., Kim, H.J., Moon, J.H. (2022) "In Situ Raman Spectroscopy of Ye'elimite Clinker", Baltimore, Maryland, USA, May 31- Jun. 3, 2022 

  • Kim, H.J. (2022) “Designing sustainable materials” RESTRUCT spring 2022 interactive workshop, University of Arizona, USA, April 11-15, 2022

  • Kim, H.J., Khalid, H.R., Lee, H.K. (2021) “The effect of calcium aluminate cement on physicochemical properties of geopolymer-supported zeolites” ICCM 2021: 11th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete, Université de Sherbrooke, Université Toulouse III - Paul Sabatier (online), Netherlands, Jun. 7-10, 2021

  • Kim, H.J., Loh, H.C, Masic, A. (2021) “In-situ Raman spectroscopy of sulfate phases in early-stage OPC hydration”, Materials Research Society (MRS) Spring Meeting 2021 (online), Apr. 17-23, 2021

  • Weger, D. Kim, H.J. Talke, D. Henke, K. Kränkel, T. Gehlen, C. (2020). “Lightweight Concrete 3D Printing by Selective Cement Activation–Investigation of Thermal Conductivity, Strength and Water Distribution”, Digital Concrete: 2nd RILEM International Conference on Concrete and Digital Fabrication, Eindhoven University of Technology (online), Netherlands, Jul. 6-9, 2020

  • Kim, H.J., Loh, H.C, Masic, A (2020) “Designing Modern Concrete using CFBC Ash By-Products: In-Situ and Operando Tracking of Hydration Products” Gordon Research Seminar (GRS) / Gordon Research Conference (GRC): Advanced Materials for Sustainable Infrastructure Development, Ventura, USA, Feb. 22-28, 2020

  • Kim, H.J., Kim, H.K., and Lee, H.K. (2018) “Dimensional stability of sodium silicate activated CFBC ash/ slag mortar”, Advanced Materials for Sustainable Infrastructure Development (Gordon Research Conference), Hong Kong, China, Aug. 5-10, 2018

  • Kim, G.M., Khalid, Hammad R., Kim, H.J., Lee, H.K. (2017) "Effect of Modified Blast Furnace Slag on Physical Properties of Alkali Activated Slag", The World Congress on Advances in Aeronautics, Nano, Bio, Robotics and Energy (ANBRE), ANBRE17, Ilsan, Korea, Aug. 28 – Sep. 1, 2017

  • Kim, H.J., Jin, D.W., and Lee, H.K (2017), "A Preliminary Study on Carbonated CFBC/MSWI Bottom Ash Aggregates", World of Coal Ash Conference (WOCA) 2017, WOCA 2017, Kentucky, USA, May 8-11, 2017

  • Kim, H.J., Jang, J.G and Lee, H.K. (2015), "Characterization of Bottom Ash from Circulating Fluidized Bed Combustion and its Application in CO2 Sequestration", Society of Engineering Science (SES) 52nd Annual Technical Meeting 2015

  • Jang, J.G., Kim, G.M., Kim, H.J. and Lee, H.K. (2015), "Carbon Dioxide Uptake in Cementitious Materials: A Review of the State of the Art", IMIMEC2015, Bali, Indonesia, Feb. 4-6, 2015

  • Jang, J.G., Kim, H.J., Kim, H.K., and Lee, H.K. (2014), "Resistance of Coal Bottom Ash Concrete Against Chloride Penetration and Carbonation, US-Korea Conference (UKC) on Science, Technology, and Entrepreneurship 2014, UKC 2014, San Francisco, California, USA, Aug. 6-9, 2014

  • Kim, H.J., Lee, N.K., and Lee, H.K. (2013), "Expansion Characteristics of Alkali-Activated Mortar Incorporating Power Plant Bottom Ash", 26th KKHTCNN Symposium on Civil Engineering, 2013, KKHTCNN, Singapore, Nov. 18-20, 2013

-Invited Seminar-

 

  • Development of Eco-Filament for 3D Printing in Construction and CO2 sequestration, Department of Civil and Environmental Engineering, University of Houston, Feb. 10. 2023

  • Multi-scale characterization of advanced materials in civil engineering and convergence technologies, 2022 Future-Shaping ACE Congress, Korea University, Nov. 21. 2022

  • The next generation of technology in civil & architectural engineering. Department of Architectural Engineering, Incheon National University, May 3rd, 2022

  • Designing sustainable construction materials for carbon neutrality by 2050. Infrasphere Education Research Center, Seoul National University Nov. 19, 2021

  • Carbon neutrality: From understanding cement hydration kinetics to designing sustainable construction materials. Department of Civil and Environmental Engineering, KAIST, Nov. 23, 2021

      

bottom of page